Have you ever seen how golden watches are made? You may join us and visit “NIKA” company to see how it makes over 25 thousand precious items monthly.
This 12 kg bar costs (about 650 thousand dollars).
Specialists check fineness of alloys made at this factory as well.
The gold bar 12 cm long and 5 mm thick turns into a band up to 2,5 m long and 0,25 mm thick. It goes through the shafts of the rolling mill more than 50 times.
Two parts of a watch case are connected.
They stick small parts with vaseline (solder).
They take a small piece of gold with tweezers, dip it into vaseline and stick to the case.
On such a tape the cases will go to the furnace where the details will smelt and solder while vaseline will evaporate.
Ready golden cases come out here.
This mat is used to shake off all golden dust from soles and prevent it from leaving the shop. When you step on it it starts vibrating. Quite a curious thing.
Trimming the cases.
Fixing the case.
The machine removes burrs and makes the proper radius of the case.
The next step is a technical control.
Such a tool came here from a Soviet factory that had already closed.
They use different magnifying glasses.
And other numerous tools.